CommandFusion Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Retrieving GUI File ======
<WRAP center round important 60%>
This information is provided as a last resort only, after trying all other methods to obtain the original GUI files. This is not a supported function of iViewer and as such, support cannot be offered by CommandFusion.
</WRAP>

Please note that this method will get you the GUI file only. Images will not be included.

If you need to extract the existing GUI from an iOS device, then you first must do the following:
  - Jailbreak the device (not covered in this guide)
  - Enable SSH and connect to the device using a program such as [[http://cyberduck.ch/|Cyberduck]] (not covered by this guide)

Once you have connected to the device:
  - Navigate to /private/var/mobile/applications
  - You then need to find the folder for iViewer, this will mean opening each folder until you find a folder within named iViewer4.app
  - Once you have ascertained which folder is for the iViewer application, navigate to /documents/caches
  - This folder will have two other folders in it, one of them will contain a file named cached.gui
  - Download this file, this is your main gui file

We have tested this method on a single page GUI file only - it may vary for GUI's with multiple pages etc.

CommandFusion Wiki

User Tools

Site Tools

Page Tools