User Tools
software:gui-designer:wake-on-lan
Differences
This shows you the differences between two versions of the page.
|
software:gui-designer:wake-on-lan [2013/01/30 00:29] jarrod [How to use Wake on LAN in guiDesigner] |
software:gui-designer:wake-on-lan [2015/05/14 15:38] (current) jarrod |
||
|---|---|---|---|
| Line 12: | Line 12: | ||
| * **IP Address / Hostname:** 255.255.255.255 | * **IP Address / Hostname:** 255.255.255.255 | ||
| * **Port:** 7 or 9 (either - try both if one doesn't work, this is dependant on your hardware being controlled) | * **Port:** 7 or 9 (either - try both if one doesn't work, this is dependant on your hardware being controlled) | ||
| - | * **Port Origin:** same as Port | + | * **Port Origin:** Set this to any port number above 1024. Lower port numbers might not be usable depending on the mobile platform you are running iViewer on. |
| * Leave all other settings as default | * Leave all other settings as default | ||
| * Press ''OK'' | * Press ''OK'' | ||
| Line 20: | Line 20: | ||
| Next, we will use the WOL Generator to create the "Magic Packet" required to make the WOL command work.\\ | Next, we will use the WOL Generator to create the "Magic Packet" required to make the WOL command work.\\ | ||
| \\ | \\ | ||
| + | |||
| To do this: | To do this: | ||
| - Click on ''View'' on the menu bar, then choose ''WOL Generator'' | - Click on ''View'' on the menu bar, then choose ''WOL Generator'' | ||
software/gui-designer/wake-on-lan.1359505793.txt.gz · Last modified: 2013/01/30 00:29 by jarrod
