User Tools
hardware:modules:mod-ssry4
Differences
This shows you the differences between two versions of the page.
|
hardware:modules:mod-ssry4 [2012/08/10 01:27] aaron created |
hardware:modules:mod-ssry4 [2012/09/07 04:39] (current) jarrod |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== MOD-SSRY4 ====== | ====== MOD-SSRY4 ====== | ||
| + | The MOD-SSRY4 is a modular unit with 4 x 250VAC 2A Solid State Relay ports.\\ | ||
| + | The benefit of solid-state relays are their extremely low noise (almost silent) switching, typical 10x faster switching, dramatically longer lifetime and more reliable (no moving parts). | ||
| + | |||
| + | <WRAP important round 50%> | ||
| + | === Max Load per Relay Channel === | ||
| + | 250VAC, 2A | ||
| + | </WRAP> | ||
| + | |||
| + | ===== Ports ===== | ||
| + | Front of the module has four detachable screw terminal blocks.\\ | ||
| + | Each port features two common pins allowing you to easily loop input voltages across multiple ports for simplified wiring. | ||
| + | |||
| + | **Pinout - Top Row** | ||
| + | - Port 1 Common | ||
| + | - Port 1 Common | ||
| + | - Port 1 Load | ||
| + | - Port 2 Common | ||
| + | - Port 2 Common | ||
| + | - Port 2 Load | ||
| + | |||
| + | **Pinout - Bottom Row** | ||
| + | - Port 3 Common | ||
| + | - Port 3 Common | ||
| + | - Port 3 Load | ||
| + | - Port 4 Common | ||
| + | - Port 4 Common | ||
| + | - Port 4 Load | ||
| + | |||
| + | ===== Rear Connector ===== | ||
| + | The rear of every module contains a module port, used to connect the module into the modular controller base unit (DIN-MOD4, etc). The pinout for this port is not published. | ||
hardware/modules/mod-ssry4.1344562068.txt.gz · Last modified: 2012/08/10 01:27 by aaron
