User Tools
hardware:modules:mod-lry8
Differences
This shows you the differences between two versions of the page.
|
hardware:modules:mod-lry8 [2012/08/10 01:28] aaron created |
hardware:modules:mod-lry8 [2012/09/07 04:53] (current) jarrod |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== MOD-LRY8 ====== | ====== MOD-LRY8 ====== | ||
| + | The MOD-LRY8 is a modular unit with 8 x 30VDC 1A Latching Relay ports.\\ | ||
| + | Latching relays will remain in their open or closed state on power loss, allowing loads to return to their previous states without interruption. | ||
| + | |||
| + | <WRAP important round 50%> | ||
| + | === Max Load per Relay Channel === | ||
| + | 30VDC, 1A | ||
| + | </WRAP> | ||
| + | |||
| + | ===== Ports ===== | ||
| + | Front of the module has four detachable screw terminal blocks.\\ | ||
| + | |||
| + | **Pinout - Top Row, Terminal Block 1** | ||
| + | - Port 1 Common | ||
| + | - Port 1 Load | ||
| + | - Port 2 Common | ||
| + | - Port 2 Load | ||
| + | |||
| + | **Pinout - Top Row, Terminal Block 2** | ||
| + | - Port 3 Common | ||
| + | - Port 3 Load | ||
| + | - Port 4 Common | ||
| + | - Port 4 Load | ||
| + | |||
| + | **Pinout - Bottom Row, Terminal Block 1** | ||
| + | - Port 5 Common | ||
| + | - Port 5 Load | ||
| + | - Port 6 Common | ||
| + | - Port 6 Load | ||
| + | |||
| + | **Pinout - Bottom Row, Terminal Block 2** | ||
| + | - Port 7 Common | ||
| + | - Port 7 Load | ||
| + | - Port 8 Common | ||
| + | - Port 8 Load | ||
| + | |||
| + | ===== Rear Connector ===== | ||
| + | The rear of every module contains a module port, used to connect the module into the modular controller base unit (DIN-MOD4, etc). The pinout for this port is not published. | ||
hardware/modules/mod-lry8.1344562114.txt.gz · Last modified: 2012/08/10 01:28 by aaron
