User Tools
hardware:modules:mod-hry2
Differences
This shows you the differences between two versions of the page.
|
hardware:modules:mod-hry2 [2012/09/07 04:05] jarrod |
hardware:modules:mod-hry2 [2012/09/07 04:34] (current) jarrod |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== MOD-HRY2 ====== | ====== MOD-HRY2 ====== | ||
| - | The MOD-HRY2 is a modular unit with 2 x 250VAC 15A Relay ports.\\ | + | The MOD-HRY2 is a modular unit with 2 x 250VAC 15A Latching Relay ports.\\ |
| - | This module can be used to switch high amperage loads directly. | + | This module can be used to switch high amperage loads directly.\\ |
| + | Latching relays will remain in their open or closed state on power loss, allowing loads to return to their previous states without interruption. | ||
| + | |||
| + | <WRAP important round 50%> | ||
| + | === Max Load per Relay Channel === | ||
| + | 250VAC, 15A | ||
| + | </WRAP> | ||
| ===== Ports ===== | ===== Ports ===== | ||
| Line 12: | Line 18: | ||
| - Port 2 - | - Port 2 - | ||
| - | ==== Rear Connector ==== | + | ===== Rear Connector ===== |
| The rear of every module contains a module port, used to connect the module into the modular controller base unit (DIN-MOD4, etc). The pinout for this port is not published. | The rear of every module contains a module port, used to connect the module into the modular controller base unit (DIN-MOD4, etc). The pinout for this port is not published. | ||
hardware/modules/mod-hry2.1346990712.txt.gz · Last modified: 2012/09/07 04:05 by jarrod
