User Tools
hardware:modules:mod-com4
Differences
This shows you the differences between two versions of the page.
|
hardware:modules:mod-com4 [2012/08/10 02:26] aaron |
hardware:modules:mod-com4 [2013/09/02 05:03] (current) jarrod [Front Pinouts] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== MOD-COM4 ====== | ====== MOD-COM4 ====== | ||
| The MOD-COM4 is a modular unit capable of up to 4 x RS232 ports, also configurable for RS422 and RS485.\\ | The MOD-COM4 is a modular unit capable of up to 4 x RS232 ports, also configurable for RS422 and RS485.\\ | ||
| + | |||
| + | ===== Quick Reference Guide ===== | ||
| + | |||
| + | The Modules Quick Reference Guide provides the basic information required to get started on a printable, black and white document that can be easily taken with you to a job site. [[http://www.commandfusion.com/docs/quick/QuickReferenceGuide-Modules.pdf|Find the Modules Quick Reference Guide here.]] | ||
| + | |||
| ===== Ports ===== | ===== Ports ===== | ||
| Line 13: | Line 18: | ||
| RS232 can never be in ports 1 or 2 (top row) when using alongside RS485 or RS422 (bottom row).\\ | RS232 can never be in ports 1 or 2 (top row) when using alongside RS485 or RS422 (bottom row).\\ | ||
| \\ | \\ | ||
| - | For more details on the MOD-COM4 port configuration options, please see the MOD-COM4 CFLink documentation.\\ | + | For more details on the MOD-COM4 port configuration options, please see the [[hardware:cflink:com-module-cflink-documentation|MOD-COM4 CFLink documentation]].\\ |
| ==== Front Pinouts ==== | ==== Front Pinouts ==== | ||
| Line 36: | Line 41: | ||
| **1 x RS485 half-duplex** | **1 x RS485 half-duplex** | ||
| - | - Data + | + | - Data + (B) |
| - Ground | - Ground | ||
| - Not Connected | - Not Connected | ||
| - | - Data - | + | - Data - (A) |
| - Ground | - Ground | ||
| - Not Connected | - Not Connected | ||
| Line 54: | Line 59: | ||
| The rear of every module contains a module port, used to connect the module into the modular controller base unit (DIN-MOD4, etc).\\ | The rear of every module contains a module port, used to connect the module into the modular controller base unit (DIN-MOD4, etc).\\ | ||
| The pinout for this port is not published (as it has no benefit to any user). | The pinout for this port is not published (as it has no benefit to any user). | ||
| - | |||
| - | |||
hardware/modules/mod-com4.1344565612.txt.gz · Last modified: 2012/08/10 02:26 by aaron
