User Tools
hardware:cflink:error-codes
Differences
This shows you the differences between two versions of the page.
|
hardware:cflink:error-codes [2015/06/02 01:09] jarrod |
hardware:cflink:error-codes [2021/05/16 23:58] (current) jarrod [100 - 199: LAN Bridge & Solo Error Codes] |
||
|---|---|---|---|
| Line 14: | Line 14: | ||
| * 006 = Invalid ''TGT'' CFLink ID | * 006 = Invalid ''TGT'' CFLink ID | ||
| * 007 = Duplicate ''TGT'' CFLink ID Defined | * 007 = Duplicate ''TGT'' CFLink ID Defined | ||
| - | * 008 = ''TGT'' CFLink ID is local Sub ID | + | * 008 = ''TGT'' CFLink ID is local CFLink ID |
| * 009 = ''DID'' Invalid CFLink ID | * 009 = ''DID'' Invalid CFLink ID | ||
| * 010 = ''DID'' Invalid Serial Number | * 010 = ''DID'' Invalid Serial Number | ||
| * 011 = ''DID'' Serial Number did not match target device | * 011 = ''DID'' Serial Number did not match target device | ||
| + | * 012 = Multiple module numbers are not supported for this command | ||
| + | * 013 = Memory file format error | ||
| + | * 014 = File read ended unexpectedly | ||
| + | * 015 = Failure MOD-IR8 hardware | ||
| + | * 016 = Memory empty | ||
| + | * 017 = Invalid checksum | ||
| + | * 019 = Another HTTP Request is still in progress. | ||
| ==== Rules Engine Errors ==== | ==== Rules Engine Errors ==== | ||
| Line 68: | Line 75: | ||
| * 083 = ''SPW'' Command, but not in 232 Mode | * 083 = ''SPW'' Command, but not in 232 Mode | ||
| - | ===== 100 - 199: LAN Bridge Error Codes ===== | + | ===== 100 - 199: LAN Bridge & Solo Error Codes ===== |
| * 100 = Invalid IP Address | * 100 = Invalid IP Address | ||
| Line 104: | Line 111: | ||
| * 132 = Slot 2 is not subscribed to Slot 1 | * 132 = Slot 2 is not subscribed to Slot 1 | ||
| * 133 = ''SND'' Command Invalid Packet | * 133 = ''SND'' Command Invalid Packet | ||
| + | * 134 = Invalid authentication. Must login using CLANPWD command on first connection. | ||
| + | * 151 = ''RUN'' command macro name could not be found. | ||
| + | * 153 = Network slot configured as UDP socket, but data could not be sent to the network. Check network settings. | ||
| + | * 154 = Network slot configured as TCP Client, but was not connected to a TCP Server. Data could not be sent. | ||
| + | * 155 = Network slot is disabled. Data cannot be sent on this slot. | ||
| + | * 157 = Network Bridging configuration is invalid - too many sockets are required. Check network slot configurations. | ||
| ===== 200 - 224: CFMini Error Codes ===== | ===== 200 - 224: CFMini Error Codes ===== | ||
hardware/cflink/error-codes.1433207374.txt.gz · Last modified: 2015/06/02 01:09 by jarrod
