8 × latching (polarized) relays.
Retain their state even during power off.
The LRY8 module features 8 × 30V DC 1A latching relays. Perfect for low voltage relay control applications.
Simple to use.
Open protocol.
As with all CommandFusion products, our communication protocol is open and available to anyone. Relay modules have very simple commands for setting the relay states on, off, toggling and pulsing. » View CFLink Protocol Docs
Need more relay ports?
Just get another module.
The beauty of the modular controllers is their flexibility. Need more of a specific port? Get another module and plug it in.
Secure terminals.
Reliable connections.
The LRY8 module uses spring terminal blocks for connections. This results in simple to insert, yet secure wiring in any installation.
Overview
The LRY8 module features 8 low voltage (30V DC, 1A) relay ports, and comes with spring terminals for quick and easy, yet secure connections to external relay-controlled devices. Plug it into a modular controller to add relay control ports to your system.
Power On States
Each relay port can be configured to be in open, closed or resume last state on power up. And because the relays are latching (polarized), they will stay in their open or closed state even when power is lost.
Extended Functionality
Most relay control systems out there allow you to set relays on or off, and require complex programming on a control processor to perform anything else. Our relay control protocol includes additional functionality such as a simple toggle command (so that you don't have to keep track of the relay state for basic toggle actions) and a pulsing command to pulse the relay closed for a time period, then opening again (of course, the time period is customisable as part of the protocol). Relay control has never been so easy.
GalleryHigh res photos in downloads section
Front View - 8 × 30V DC 1A latching relay ports
Side View
Rear View
Technical SpecificationsSee hardware documentation for more details
| Connectivity | |
|---|---|
| Module Connector | 24-pin connector to connect to modular controller unit |
| Relay 1-8 | 4 x detachable 4-pin 3.50mm terminal block consisting of 8 channels of relay ports. Wire range: 24-16 AWG Relay Rating: 30V DC 1A |
| Top Panel | |
| Clip | Secures and releases the module from the modular controller unit. |
| Label | Model and serial number information. |
| Power | |
| Power Consumption | Power usage 600mW maximum, powered by modular controller DIN-MOD4 or MOD4 (not included) |
| Physical | |
| Enclosure | Polycarbonate with dark grey matte finish |
| Height | 32.8mm (1.29in) |
| Width | 40mm (1.57in) |
| Depth | 68mm (2.68in) |
| Weight | 0.08kg (0.18lbs), Shipping 0.2kg (0.44lbs) |
| Environmental & Regulatory | |
| Temperature | 5°C to 45°C (41°F to 113°F) |
| Humidity | 20% to 85% RH, non-condensing |
| Certification | FCC, CE, C-Tick |
| Warranty | |
| Warranty | 5 years limited warranty |
Downloads & Documentation
Manuals
Modules Quick Reference Guide includes details for all of our modules, such as pinout diagrams and general connectivity details.
Single page specification sheet.
Application Diagrams
High Resolution Photos
Coming Soon...
© 2024 CommandFusion Pty Ltd. All rights reserved.